EASY-CHANGE Riser System: Standard Starter Pack
The EASY-CHANGE Riser System: Standard Starter Pack is a set of 4 mm and 8 mm risers for saddles fitted with the EASY-CHANGE Fit Solution, except pony and jump models. It covers the smaller changes to the depth of the panel to alter the balance.
Like all EASY-CHANGE risers, they go in a separate pocket, away from the CAIR cushions. Changes are made in measured steps, the same on both sides, and can be reversed.
If you need bigger front or rear changes, the EASY-CHANGE Riser System: Standard Pack adds 12 mm and 16 mm risers.
The Riser System pairs with the EASY-CHANGE Gullet System, which changes the width of the Elastiflex tree, to make up the EASY-CHANGE Fit Solution, part of HART on HART saddles.
Read more
-
What is the difference between the EASY-CHANGE Riser System: Standard Starter Pack and the EASY-CHANGE Riser System: Standard Pack?
The EASY-CHANGE Riser System: Standard Starter Pack has front, center and rear risers in 4 mm and 8 mm. The EASY-CHANGE Riser System: Standard Pack has the same plus 12 mm and 16 mm front and rear risers.Can I use the EASY-CHANGE Riser System: Standard Starter Pack in a pony or jump saddle?
No. Pony and jump saddles need the EASY-CHANGE Riser System: Pony/Jump Pack. -
Front, center and rear risers in 4 mm and 8 mm, an instruction manual and the EASY-CHANGE Locating Tool.
-
- Keep the risers you are not using in the pack with the instruction manual and EASY-CHANGE Locating Tool, somewhere dry.
- The CAIR cushions are sealed and are never adjusted or reflocked. To change the balance, use EASY-CHANGE risers.
Key features
- Front, center and rear risers in 4 mm and 8 mm
- Covers smaller changes to the panel balance
- Risers sit in a separate pocket, away from the CAIR cushions
- Measured, symmetrical and reversible adjustments
- EASY-CHANGE Locating Tool and instruction manual included